NANOCOLOR Vario 4 Heating Block
The heating block of the future...
The NANOCOLOR® VARIO 4 is cutting edge heating block offering high temperature stability, overheat protection and a graphical display of the heating curve.
This unit features replaceable strong safety covers on the heating block surface, lockable protective lids and a visual alarm when the protective lid is open.
Internal quality control in accordance with ISO 9001, complies with quality control requirements, displays a heating curve to ensure temperature stability - calibration of temperature is possible. Data transfer via USB or RS232 serial interface for logging data - able to generate quality certificates using the 'T-Set' temperature calibration software.
Benefits
- Short warm up time (from 20 to 160 °C in just 10 minutes)
- High-speed COD, Total N, Total P and Total metals analysis in just 30 minutes
- User-friendly, bright touch-screen
- No training required
- Inspection and calibration with NANOCOLOR® USB T-Set
Technical data
Instrument: |
NANOCOLOR® VARIO 4 |
Type: |
Programmable heating blocks for chemical-analytical digestions with 24 holes /for test tubes with 16 mm OD (outer diameter) / integrated protective lids |
Display: |
Coloured, backlit LCD touch screen |
Operation: |
Display menu guidance via touch screen |
Temperatures: |
5 pre-programmed temperatures: 70 / 100 / 120 / 148 / 160 °C 7 free memory locations for individual temperature settings |
Temperature range: |
40 – 160 °C (1 °C increments) |
Temperature stability: |
± 1 °C (according to DIN, EN, ISO and EPA methods) |
Warm-up time: |
from 20 °C to 160 °C within 10 minutes |
Heating times: |
4 pre-programmed heating times: 30 min / 60 min / 120 min / cont. 8 free memory locations for individual heating times |
Time range: |
0h:01min – 9h:59min (increments 0h:01min) |
Safety: |
Replaceable safety covers as contact protection Lockable protective lids Overheating protection |
Interfaces: |
Bidirectional serial RS 232, USB A (master) and USB B (slave) |
Analytical quality control: |
With NANOCOLOR® T-Set (REF 919 917) optional fully automatic calibration and preparation of test certificates for instrument control and monitoring according to ISO 9001) |
Update: |
Via internet and USB stick |
Power supply: |
110 – 230 V~, 50/60 Hz |
Power consumption: |
250/500 VA |
Dimensions (B x T x H): |
290 x 287 x 146 mm |
Weight: |
approx. 3.2 kg |
Marking: |
CE |
Warranty: |
2 years |
 |
These instruments conform to the following directives: - 2006/95/EC – Low-Voltage Directive - 2004/108/EC - EMV Directive |
