Single Channel Analyser
The InsiteIG_SCA Single Channel Analyser can accept any of the standard Insite IG sensors for:
- Dissolved Oxygen
- Suspended Solids (Low-Range or Standard Range)
- pH or ORP
The SCA has an alpha-numeric LCD display that is backlit and UV protected. The first line displays the type, reading, and units of the sensor. The second line displays the temperature for DO, pH, and ORP sensors.
The SCA will automatically recognize the sensor type (DO, SS, pH, or ORP) and configure itself for proper operation. The DO sensor will come factory calibrated and ready for use. The SS sensor is zeroed at the factory, and comes with a default calibration curve. The pH electrode is factory calibrated with its holder, and the ORP electrode is matched with its holder. To utilise factory calibrations for SS and pH, sensors must be connected to the analyzer indicated per the "Factory Sensor Configuration" label located on the analyzer.
The Optical DO sensor does not need sensor caps, membranes, fill solutions, nor routine calibrations and maintenance. The SS sensor is based on near infrared technology, which eliminates inaccuracies caused by changes in the process color or changes in particle size. The pH sensor is flat glass / double reference junction temperature compensated construction with embedded electronics for reliable digital communications. The ORP sensor is flat surface platinum / double reference junction construction with embedded electronics for reliable digital communications.
The new SCA is a direct replacement for the older Model 1000 or Model 1500 transmitter - the sensors are the same and the SCA can be used with the same Model 10 (Dissolved Oxygen) or Model 15/15L (Suspended Solids) sensors.
A portable version of the analyser is available as the 'IPM' (Insite Portable Monitor) - this too is capable of reading any of the parameters listed above using specially adapted portable versions of the same sensor technology. Additionally a Dual Channel Analyser and Multi-Parameter Analyser are also available for added flexibility.
BACK TO DISSOLVED OXYGEN PAGE↵
BACK TO SUSPENDED SOLIDS PAGE↵
- 2 x isolated 4-20mA outputs
- 2 x set-point relays
- 1 x set point or alarm relay
- 1 x cleaning relay
- RS-485 Modbus RTU output
- IP65 rated
- Extended temp range display
- U.V. protected display
- Simple, plain English menus
- Full 2 year warranty
Click on the images to download the SCA or DCA brochure(s)
Or contact us for more information on Insite IG analysers
- Format: PDF
- Filesize: 723KB / 710KB
Click on the image to open a quote request form for the Insite SCA or DCA
Or contact us for more information on our range of online analysers