Continuous Suspended Solids

Insite IG Suspended Solids sensors

suspended solids monitor

Dual Channel

optical dissolved oxygen monitor

Single Channel

The Model 15 Suspended Solids Sensor incorporates near infrared technology, solid state electronics, and custom geometry. The near infrared technology provides increased dependability of the reading when color changes in the solids occur.

The solid state electronics increases consistency of the reading and reliable digital communications up to 600m. The custom geometry optimises the sensor for its measurement range and facilitates the integrated jet clean.

portable monitor

Insite Portable

ph, DO, SS and ORP

Multi-parameter

Our continuous SS sensors come standard with tool free ¼" O. D. tubing connectors for the integrated jet clean and 33ft (10m) of sensor communications cable. Additional cable length is available upon request.

The sensor comes in various guises, including a sensor for the 'IPM' portable logger as well as a few different options for connection to the Single Channel, Dual Channel and Multi-Parameter transmitters:

 

suspended solids

Model 15

The Model 15 Sensor is the standard sensor mount.

This model features all of the above with a PVC 1-½" NPT male mounting thread.

Model15: Recommended for: 250 - 30,000 mg/l

low-range suspended solids

Model 15L

The Model 15L Sensor is designed to measure very low solids concentrations typically found in secondary clarifier and plant effluents. This model has a PVC 1-½" NPT male mounting thread.

Model 15L: Recommended for: 0 - 1500 mg/l

suspended solids analyser

Model 15PI

The Model 15PI Sensor is intended for in-line monitoring in a large diameter pipe . The mount is 2" NPT male thread in 316 stainless steel that works with a customer supplied 2" Thread-O-Let. The integrated jet clean with this sensor includes an in-line check valve. There is a flow indication groove on the back of the sensor mount that should be parallel with the flow. Maximum in-line pressure is 20 psi. See the Single Channel Analyzer (SCA) manual for additional information.

Model 15PI: Recommended for: 250 - 30,000 mg/l

suspended solids analyser

Model 15T

The Model 15T Suspended Solids Sensor is intended for sample by-pass lines of mixed liquor, return, or waste activated sludge. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is Schedule 80 PVC, with 3" slip connections for process piping and a 2" female NPT connection for the SS probe. The integrated jet clean with this sensor includes an in-line check valve. There is a flow indication groove on the back of the sensor mount that should be parallel with the flow. Maximum in-line pressure is 20 psi. See the Single Channel Analyzer (SCA) manual for additional information.

Model 15T: Recommended for: 250 - 30,000 mg/l

hot tap suspended solids

Model 17A SS

This 'Hot Tap' Model 17A Suspended Solids Sensor combines the ease of use of a hot tap mount with the reliability of the InsiteIG SS Sensor. The mount is a 2" NPT male thread in 316 stainless steel that works with a customer supplied 2" Thread-O-Let, saddle or existing piping. The integrated jet clean includes an in-line check valve. There is a flow indicator on the back of the sensor mount that should be parallel with the flow. Maximum in-line pressure is 40 psi.

Model 17A SS: Recommended for: 250 - 30,000 mg/l.

Other Sensors in this range: Optical Dissolved Oxygen - pH / ORP